Sealing cord, round stove seal, 06mm, braided, self-adhesive

With this fire-resistant, round, self-adhesive sealing cord, braided with cord (glass knit cord based on E-glass fibre), you can quickly and reliably seal glass ceramic panels or also doors of fireplace or tiled stove inserts. Due to the additional cord, it is harder, similar to the 6 mm seal with brass wire.

Application temperature up to 550 °C

Dimensions of the fire-resistant sealing cord: 6 mm diameter, braided with cord

Please make sure that the fire-resistant sealing cord always remains elastic. Over time, the fire-resistant sealing cord may harden. The stove glass then sits tightly against the stove body or in the door frame and can no longer expand due to temperature differences. In the worst case, the glass pane cracks. In this case, the fire-resistant sealing cord must be replaced. As a door seal, it must also remain elastic, otherwise the seal to the body will not work properly and the stove will draw in false air. Your stove will suffer damage and warp, as higher temperatures then prevail in the combustion chamber.

The reasons for such hardening can vary. Overheating with larger fill quantities than specified in the respective operating instructions, as well as the use of unsuitable and aggressive cleaning agents, can significantly shorten the service life. Protect the sealing cords from moisture during cleaning, or more precisely, from cleaning agents. Do not brush off or clean mechanically in any other way. Do not let the ash or embers bed rise so high that the sealing cords are exposed to direct flame.

The seal is self-adhesive, so you do not need any sealing cord adhesive if the seal is clamped or otherwise fixed in place. The self-adhesive property allows you to work more easily and conveniently. In other cases, the sealing cord must be fixed with sealing cord adhesive, as the binding components in the adhesive film decompose at approximately 80 °C to 100 °C.