Collection: Stove pipes for a precisely fitting stove pipe connection

Stove pipes are used for the professional and safe removal of the exhaust gases produced during combustion. The stove pipe is therefore the connection from the stove to the chimney.

Which stovepipes are there?

Stove pipes are available in painted, enamelled or hot-aluminized sheet steel. We have the right stove pipes for every stove pipe connection. Whether for the fireplace, pellet stove, coal stove or oil stove, you will find the right stovepipes here. Please measure your stove connection carefully and then choose the stove pipes with the appropriate diameter. Whether black, brown, gray or white. You decide what you like best.

How can you shorten stove pipes?

In many cases, the stove is subsequently connected to an existing chimney opening. Then a piece of the stove pipe usually has to be cut off. It should be noted that the smoke pipes are inserted into each other and pushing them into the wall lining also takes away a few cm from the total length. Shortening is best done with an angle grinder. After measuring and marking, place some masking tape around the interface. This ensures that chips on the stovepipe are minimized. Working carefully also ensures an intact coating after shortening.

What else needs to be taken into account?

Some stoves also require a transition piece because the stove pipe connection is not standardized to the usual sizes. This affects, among others, the pellet stoves from MCZ, Olsberg and Buderus.

How and how often does the stove pipe need to be cleaned?

The exhaust paths to the chimney must be clear so that they can escape unhindered. If ash and soot deposits have settled, the cross-section of the stove pipe is reduced and the draft is reduced. The smoke gases have a harder time escaping and may come out in less dense places. Health hazard! The combustion is also no longer efficient, they use too much fuel. Soot fires can also occur. Stove pipes or stove pipe elbows have cleaning covers that can be opened for cleaning purposes. The seals underneath ensure tightness and must be changed if necessary. To clean yourself, please use special tube brushes .