Box elbow DN 150 Extension 335-470 mm Flat elbow adjustable black

High-quality box elbow as a stove pipe connector with 150mm connection on both sides. Ideally usable when replacing stoves with different connection heights. So if the height of the wall thimble and stove connection does not match, use this adjustable box elbow to position the stove close to the wall despite differing wall thimble height in the chimney.

Extension: 335 - 470 mm (center hole to center hole)

The box elbow consists of 2 parts and is only plugged in. Ideally, the plug area should be secured with a thin flat gasket.

Dimensions:

• Width: approx. 21 cm
• Depth without spout: approx. 10 cm
• Total length at minimum extension: approx. 52 cm
• Total length at maximum extension: approx. 65 cm

Weight: 8.4 kg (for both parts)

Material thickness: 2 mm

Surface: black senotherm lacquered (also available in gray - just ask)

Application temperature: approx. 500 degrees (non-binding)

Theoretically, the box elbow can be shortened further, but then the component's certification expires. It was tested and approved with the specified extension.

Note that small irregularities or imperfections in the paint may occur during handcrafting. This is not a defect here.

Upon request, this can also be made for other diameters. Just inquire.