Box elbow DN 150 Extension 335-470 mm Flat elbow adjustable black

High-quality rectangular elbow as a stove pipe connector piece with 120mm connection on both sides. Ideally used when replacing wood stoves/coal stoves with different connection heights. So if the height of the wall sleeve and stove connection do not match, use this adjustable rectangular elbow to position the stove close to the wall in the chimney despite a height-differing wall sleeve.

Extension: 335 - 470 mm (center hole to center hole)

The rectangular elbow consists of 2 parts and is only plugged together. Ideally, the plug area should be secured with a thin flat gasket.

Dimensions:

• Width: approx. 21.5 cm
• Depth without socket: approx. 10.5 cm
• Total length at minimum extension: approx. 49 cm (at approx. 33.5 cm extension)
• Total length at maximum extension: approx. 62 cm (at approx. 47 cm extension)

Weight: 7.1 kg (for both parts)

Material thickness: 2 mm

Surface: black senotherm coated (also available in gray - just ask)

Operating temperature: approx. 500 degrees (non-binding)

In theory, the rectangular elbow can be shortened further, but then the component’s certification expires. It was tested and approved with the specified extension.

Please note that small irregularities or imperfections in the coating may occur during manual production. This is not a defect.

On request, this can also be made for other diameters. Just inquire.

Please note that the rectangular elbow is custom-made and usually takes 5-8 weeks.