Box Elbow DN 130 Extension 335-470 mm Adjustable Flat Elbow Black

High-quality rectangular elbow as a stove pipe connector with 130mm connection on both sides. Ideally used when replacing wood stoves/coal stoves with different connection heights. If the height of the wall collar and stove connection do not match, use this adjustable rectangular elbow to position the stove close to the wall in the chimney despite differing wall collar heights.

Extension: 335–470 mm (center hole to center hole)

The rectangular elbow consists of 2 parts and is simply plugged together. Ideally, the plug area should be secured with a thin flat gasket.

Dimensions:

• Width:
• Depth without spigot:
• Total length at minimum extension:
• Total length at maximum extension:

Weight: 8.4 kg (for both parts)

Material thickness: 2 mm

Surface: black Senotherm coated (also available in gray – just ask)

Operating temperature: approx. 500 degrees (non-binding)

In theory, the rectangular elbow can be shortened further, but then the component’s certification becomes void. It has been tested and approved with the specified extension.

Please note that small irregularities or imperfections in the coating may occur during manual production. This is not considered a defect.

On request, this can also be made for other diameters. Just inquire.

Please note that the rectangular elbows are custom-made and usually take 5–8 weeks.