Rotating elbow box DN 120 mm, adjustable extension 0-60mm

The height of the stove pipe socket on the stove and the wall connection (wall sleeve) does not match?

Use the swivel box elbow with a 120 mm diameter. The adjustable range is 0 to 6 cm (centre of hole to centre of hole).

This high-quality rotatable stove pipe connector has an installation depth of only approx. 6 cm, which means: when the connections of your swivel box elbow are fully inserted into the wood stove/coal stove and into the chimney, the depth is only approx. 6 cm.

If both sides of the swivel box elbow are not fully inserted into the respective openings, you can vary the distance to the chimney accordingly.

This swivel box elbow (stove spare part) is made of sheet steel. It provides a clean and tight connection. You can adjust the height difference with ease. Simply adjust it at the clamping ring. Now the swivel elbow bridges height differences between the stove pipe and the wall connection.

Due to its small size, the swivel box elbow is unobtrusive and is barely noticeable behind the wood/coal stove.

Dimensions:

Diameter of the pipe sockets suitable for 12 cm / 120 mm

Depth / thickness (without pipe sockets, i.e. the middle section) only approx. 6 cm / 60 mm

Note:

The swivel box elbow may sometimes have a black protective coating. This is not stove paint; it merely protects the material from surface rust. Flaking of this protective coating may occur. It burns off during the first few firings.