Sealing cord, stove seal, round, 10mm, with metal wire, 1.5m

This grey fireproof sealing cord (glass knitted cord based on E-glass fibre) is wrapped with wire. This wire provides greater stability and better grip.

The applications range from the door on fireplace or tiled stove inserts to sealing lids on coal stoves.

Application temperature up to 550 °C

Diameter of the fireproof sealing cord: 10 mm

Length: 1.5 m

Please ensure that the fireproof sealing cord always remains elastic. Over time, the heat-resistant stove seal may harden. The fireplace door no longer closes flush, and your stove draws in incorrect air. This leads to higher combustion temperatures, and wear on the interior lining occurs much more quickly. In the worst case, the body itself can become warped. Therefore, replace the stove sealing cord in good time.

There can be various reasons for such hardening. Overheating with higher fill quantities than specified in the respective operating instructions, as well as the use of unsuitable and aggressive cleaning agents, can significantly shorten the service life. Protect the sealing cords from moisture and cleaning agents during cleaning. Do not brush off or clean mechanically in any other way. Do not let the ash or embers bed rise so high that the sealing cords are exposed to direct flame.

Our matching sealing cord adhesive is particularly suitable for gluing the fireproof sealing cord to the stove body. First clean the surface of any old sealing cord residue and adhesive. Cut the stove seal to size and then press it into the corresponding groove coated with adhesive. Allow to dry for several hours, and you can heat safely and worry-free once again.

Please note: The wire-wound sealing cords are somewhat more stable in themselves and can therefore be compressed less than a comparable seal without brass wire.