Water-fed pellet stove Extraflame Iside Idro 2.0 5.4-18.1kW

The water-bearing water-bearing pellet stove Extraflame Iside Idro 2.0 5.3-19.0kW is designed to heat extra-large spaces. By heating the water in the stove and passing it on to the central heating system, even a large single-family home can be heated.

Healthy warmth

In the installation room, the water-bearing pellet stove Extraflame Iside Idro 2.0 emits only a maximum of 3.5 kW. When the frontal ventilation is switched off, the stove heats purely through healthy radiant warmth. The advantage here is that there is no overheating of the room.

Clever electronics

The water-bearing pellet stove Extraflame Iside Idro 2.0 transfers most of its output, a strong 19 kW, to the integrated water. This heated water is then fed into the heating system. Thanks to the remarkable new electronics, connecting it to an existing system is even easier.

The water-bearing pellet stove Extraflame Iside Idro 2.0 is available in Bordeaux, white, parchment, or amethyst

You are spoilt for choice when selecting the majolica tile cladding. The pellet stove Iside Idro 2.0 is a real showpiece in any case – whether in an enchanting red or with the unique amethyst tiles.

Thanks to its slim size, the water-bearing pellet stove Extraflame Iside Idro 2.0 requires only little space in the room. Nevertheless, the integrated pellet tank holds approx. 35 kg, allowing for long burn intervals. The hourly consumption is a low 1.2 to 4.3 kg per hour.

Automatic control based on the set room temperature

The integrated warm air blower ensures truly rapid room heating. Control is fully automatic. The water-bearing pellet stove Extraflame Iside Idro 2.0 can also be connected to an external thermostat (Interface Control Temperature).

Thanks to the built-in timer thermostat, you can divide the day into up to 4 time segments during which the pellet stove should operate (Chrono Thermostat Program). This allows the stove to save energy when you are not at home.

Naturally, manual operation of the water-bearing pellet stove Extraflame Iside Idro 2.0 is also possible

Low fuel consumption through optimal coordination of all components

The regulation of primary and secondary air is electronically controlled (Electronic Air Control). The focus here is on combustion efficiency. 

Through BAFA you can apply for a sensational subsidy. Use renewable resources and protect our environment. BAFA pays you an attractive premium if you use renewable energy sources - such as wood pellets here.

Integrated technologies at a glance:

• Auto Re-Start (ARS) - Automatic restart after power failure
• Clean Glass Control (CGC) - Glass flush - prevents soot deposits
• Electronic Air Control (EAC) - Electronically coordinated control of primary and secondary air ensures efficiency
• Resistant Door at Time (RDT) - Low-wear, sturdy cast iron door
• Room Temperature Control (RTC) - Monitoring of the room temperature ensures optimal comfort operation
• Pellet Level Control (PLC) - Economical - monitoring of the pellet quantity Auto Clean Checkup (ACC) - Automatic cleaning of the burn pot after reaching the set operating hours
• Delay Stop System (DSS) - Option for delayed shutdown of the pellet stove
• Chrono Thermostat Program (CTP) - Weekly programming with settings for 4 time periods per weekday
• Keylock System (KLS) - Setting of a key lock (child safety) on the display to prevent unauthorized operation
• Interface Control Temperature (ICT) - Stove control possible depending on external thermostat
• Digital Pression Control (DPC) - Ability to read out a fault in the hydraulic system

Advantages of the water-fed Extraflame Iside Idro 2.0 pellet stove at a glance:

• Dimensions (W x D x H): 690 x 628 x 1196 mm
• Total heat output: 5.4 - 18.1 kW
• Room heat output: 1.0 - 3.1 kW
• Water heat output: 4.3 - 15.0 kW
• BImSchV Stage 2 compliant
• Efficiency: >92 %
• Hourly consumption: 1.2 - 4.3 kg/h
• Tank capacity: approx. 35 kg
• Weight: 247 kg
• Remote control: Yes
• Removable ash pan: Yes
• Fan: Yes (can be switched off)
• Removable ash pan: Yes
• Diameter flue pipe: 100 mm
• Height from center of flue pipe to top edge of floor: 258 mm
• Diameter air intake pipe: 50 mm
• Connection: 230 V
• Maximum heating volume: 545 m3
• Expansion vessel: 8 l
• Water content in heat exchanger: 18 l
• Pump delivery head: 6 m
• Maximum operating pressure: 2.5 bar
• Connection options flue pipe + air intake pipe: rear

Recommendation: Safe installation by authorized customer service

Take advantage of this opportunity and have your pellet stove installed by a trained specialist company. This not only provides peace of mind but also ensures your full manufacturer's warranty.